NOTE:STIHL saw chain is available in a variety of pitches and gauges. Use the charts to identify the correct chain part number of the chain.
Pitch
Gauge
Part #
STIHL
offers a variety of cutter types and saw chain configurations
to meet almost any cutting requirement.
NEW! OILOMATIC®
STIHL PICCO™ Micro™
Mini Comfort 3 (PMMC3)
PICCO™ Micro™ Mini Comfort
3 saw chain is the successor of
61 PMN saw chain. PMMC3
saw chain has reinforced cutter
geometry (0.1 mm thicker than 61
PMN), lower vibration levels combined
with higher cutting and boring
efficiency while maintaining a
low kickback tendency due to the
single-humped drive link design
3/8"
1/4"
.325"
3/8"
.404""
PICCO
0.043"
3610
OILOMATIC® STIHL PICCO™ Micro™ Comfort 3 (PMC3)
OILOMATIC® STIHL PICCO™ Micro™ Comfort 3 is the successor of the 3/8"
PM1. It cuts faster and smoother and has
a very high plunge cutting efficiency. PMC3
has a lower kickback tendency than 3/8"
PM1.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3636
OILOMATIC® STIHL RAPID™ Micro™ (RM)
The
OILOMATIC® STIHL RAPID™ Micro™ (RM) chain has a
special cutter shape that reduces cutting
friction to a minimum, ensuring fast cutting
speed with good efficiency in any type of
wood.
This chain is more forgiving
in dirty conditions than full chisel (RS)
chain types due to its cutter shape.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3856
3989
0.058"
3990
0.063"
3991
3960
OILOMATIC® STIHL RAPID™ Micro™ Comfort (RMC)
OILOMATIC® STIHL RAPID™ Micro™ Comfort is a low vibration version of STIHL
RAPID™ Micro™.
This chain retains all the performance of
STIHL RM, with the added benefit of lower
vibration levels,to help reduce operator
fatigue.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3627
3650
0.058"
3628
3651
0.063"
3629
3652
OILOMATIC® STIHL RAPID® Micro™ Full Skip (RMF)
STIHL
RAPID™ Micro™ Full Skip is the skip pattern version of
STIHL RAPID™ Micro™.
There are two tie straps between every two
cutting teeth, allowing better chip discharge
and higher chain speed and less sharpening
maintenance with more powerful saws and
longer guide bars.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3993
0.063"
3883
OILOMATIC®
STIHL RAPID™ Micro™
Comfort 3 (RMC3)
OILOMATIC®
STIHL RAPID™ Micro™
Comfort 3 is the reduced kickback
tendency version of STIHL RAPID™
Micro™ Comfort. RMC3 retains
all the performance of STIHL RMC, with
the
added benefit of reduced kickback tendency,
for less risk. Available only in .325"
pitch. RMC3 replaces .325 RM2.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3632
0.058"
3633
0.063"
3634
OILOMATIC®
STIHL RAPID™ Super (RS)
This
full chisel chain is an extremely fast-cutting
chain for the professional. The square-cornered
cutter shape ensures minimum cutting friction
for an extremely smooth clean cut in hard
and frozen wood. The OILOMATIC®
STIHL RAPID™ Super is best
suited for higher power chain saws. Easily
sharpened with a round file and file holder
or with electric chain grinders.
NOTE: No longer
available in 3/8" pitch, only .325"
and .404".
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3978
0.058"
3974
0.063"
3973
3946
OILOMATIC®
STIHL RAPID™ Super Comfort
(RSC)
STIHL
RAPID™ Super Comfort is
the reduced vibration version
of STIHL RAPID™ Super.
A redesigned cutter and tie strap design
reduces vibration levels significantly while
still utilizing the aggressive full chisel
cutter design. RSC offers the same cutting
characteristics to STIHL RAPID™
Super with much lower vibration levels.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3637
3623
0.058"
3638
3622
0.063"
3639
3621
OILOMATIC®
STIHL RAPID™ Super Comfort
3 (RSC3)
STIHL
RAPID™ Super Comfort 3
is the reduced vibration and reduced
kickback tendency version of STIHL
RAPID™ Super. RSC3 is an
aggressive full chisel chain, but has a
single-humped drive link to reduce kickback
tendency and the new cutter and tie strap
design of RSC to reduce vibration levels
when cutting. RSC3 also features excellent
cutting and plunge cutting efficiency.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3624
0.063"
3626
OILOMATIC®
STIHL RAPID™ Super Full Skip
(RSF)
STIHL
RAPID™ Super Full Skip
is the skip pattern version of STIHL RAPID™
Super. There are two tie straps between
every two cutting teeth, allowing better
chip discharge and higher chain speed and
less sharpening maintenance with powerful
saws and long guide bars.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3953
STIHL OILOMATIC®
RAPID™ Super L Full Skip
(RSLF)
STIHL
RAPID™ Super L Full Skip
is the skip pattern, square ground chisel
version of STIHL RAPID™
Super. There are two tie straps between
every two cutting teeth, allowing better
chip discharge, higher chain speed and less
sharpening maintenance with powerful saws
and long guide bars. Available in .404"”
pitch, .063” gauge only.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.063"
3851
OILOMATIC®
STIHL RAPID™ Super Klassic
(RSK)
This
chain is particularly suitable for felling
and bucking big timber with long guide bars
(over 28" and longer).
Its special cutter
geometry provides excellent control characteristics
and very good chip flow, which help enhance
cutting efficiency.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3874
OILOMATIC®
STIHL RAPID™ Super L Klassic
(RSLK)
The
Super L Klassic is a variation of the Klassic
full chisel chain for special professional
applications. It differs from the “normal”
STIHL RAPID™ Super Klassic
in the way the cutter is ground. The cutter
on this chain is square ground and has an
“L” shape, hence the name Super
“L.”
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3640
0.063"
3641
STIHL OILOMATIC®
RAPID™ Super L Half Skip
Klassic (RSLHK)
STIHL
RAPID™ Super L Half Skip
Klassic is the semi-skip pattern version
of STIHL RAPID™ Super L
Klassic (RSLK). STIHL RAPID™
Super L Half Skip Klassic alternates cutter
spacing to create a chain with cutting and
maintenance intensity characteristics between
Full Skip (RSLFK) and regular pattern (RSLK).
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3645
0.063"
3646
OILOMATIC®
STIHL RAPID™ Super L Full
Skip Klassic (RSLFK)
OILOMATIC®
STIHL RAPID™ Super L Full
Skip Klassic is the full-skip pattern version
of STIHL RAPID™ Super L
Klassic (RSLK). The RSLFK is assembled with
each cutter followed by two tie straps instead
of one with standard sequence chains.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3643
0.063"
3644
OILOMATIC®
STIHL RAPID™ Duro (RD)
Carbide
tipping of the cutters makes 3/8" STIHL
RAPID™ Duro chain specially
suitable for cutting dirty wood, treated
wood, roots or railroad ties, which would
quickly dull conventional chains. This chain
must be resharpened with a formed diamond
grinding wheel.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.050"
3948
0.063"
3943
OILOMATIC®
STIHL RAPID™ Duro Rescue
(RDR)
STIHL
RAPID™ Duro Rescue (RDR)
is a new STIHL designed chain using the
STIHL OILOMATIC® principle.
RDR surpasses the durability of former RDS
in Rescue applications and has a higher
efficiency when cutting wood. This chain
is purpose-built for the demanding needs
of fire and rescue specialists and therefore
is for use by specially trained emergency
services personnel only. RDR is the recommended
chain for use on the MS 460 R STIHL Magnum™
Rescue saw.
3/8"
1/4"
.325"
3/8"
.404"
PICCO
0.063"
3944
OILOMATIC® STIHL RAPID™ Micro™
Harvester (RMH)
STIHL RAPID™
Micro™ Harvester is a specially
designed and reinforced version of .404""
pitch saw chain. RMH is designed to withstand
the stresses of mechanized tree harvesting.
Designed for use on hydraulic harvester
heads only.